The voltage divider probe 12602 is used together with the 5350 to measure high voltage with high impedance . 
Thanks to the division ratio of 100:1, the 5350 can measure up to 2 kV. The probe itself and the connection cable adopt a double-shielded coaxial structure.

Operating environment:                    Temperature -+5 ℃ to  +35 ℃, relative humidity 70 % or less without codensation
Storage environment:                         Temperature -0 ℃ to + 40 ℃, relative humidity 70 % or less without codensation
Division ratio:                                           1:100 
​​​​Input resistance:                                     Approx. 1×10¹⁰ Ω
Maximum measurement voltage: 2. 5 kVDC (continuous)
​​​​​Measurment accuracy:                       ±3 ％ of rdg ±5 ppm/V
Output connector:                                 Triaxial connector
​​​​​​​Dimensions:                                              Approx. 29 (maximum diameter)  ×174（length）mm, 1000 mm (cable length)
​​​​​​​Mass:                                                             200 g or less

Connection of 12602 and 8252

The test lead 12603 is suitable for measurment by  the 5450/5451 or 5350 in which the measurement points are changed one after another such as insulation resistance measurement between patterns on PCBs.

Operating environment:                       Temperature -+5 ℃ to  +35 ℃, relative humidity 70 % or less without codensation
Storage environment:                            Temperature -0 ℃ to + 40 ℃, relative humidity 70 % or less without codensation
Capacitance:                                                100 pF or less 
Insulation resistance:                             10¹⁴Ω
Signal line reisstance:                             0.2 Ω or less 
Maximum allowable input voltage: 1100 VDC (for 1 minute, not exceeding the maximum allowable input voltage of the electrometer)
Maximum allowable input current: 2 ADC
Output connector:                                    Triaxial connector
                                                                            *To connect to the 5450, the CC015003 is required.
​​​​​​​Dimensions:                                                  Approx. 29 (maximum diameter) ×174 (length) mm, 1000 mm (cable length)
​​​​​​​Mass:                                                                200 g or less

Connection of 12603 and 5350